Revolutionize Your Jobsite with the Ultimate Tool Storage System

Table of Contents:

1. Introduction
2. Moving an Entire Stack of Packouts without Leaning 2.1 Preparing the Tools 2.2 Unscrewing the Bars 2.3 Sliding the Bar through the Packout 2.4 Attachment Plates and Set Screws
3. Installing the Packout Roller 3.1 Hand-tightening the Bolts 3.2 Securing the Top and Bottom Parts 3.3 Using Lock Nuts
4. Demonstrating the Rollability of the Packout 4.1 Stacking Up the Packouts 4.2 Wheeling the Packouts 4.3 Maneuvering through Doorways
5. Conclusion

Moving an Entire Stack of Packouts without Leaning

If you've ever moved a stack of Packouts, you know how difficult and potentially dangerous it can be to lean the stack back and transport it. However, there's a simpler and safer way to move an entire stack of Packouts without leaning. In this article, I'll show you a step-by-step guide on how to do it and introduce a useful tool that can make the process even easier.

Section 1: Introduction

Introduce the topic of moving stacks of Packouts and the challenges associated with leaning the stack for transportation.

Section 2: Moving an Entire Stack of Packouts without Leaning

Discuss the step-by-step process of moving a stack of Packouts without leaning, including the preparation of tools and the unscrewing of bars. Highlight the importance of getting the right side and sliding the bar through the Packout. Mention the use of a blow torch for bending bars if necessary.

Section 3: Installing the Packout Roller

Explain how to install the Packout roller to make the movement of the stack even easier. Describe the process of hand-tightening the bolts and attaching the top and bottom parts of the roller. Emphasize the use of lock nuts for stability and preventing movement.

Section 4: Demonstrating the Rollability of the Packout

Demonstrate the ease of moving the stack of Packouts using the installed roller. Show the stacking up of the Packouts and the rolling of the stack. Highlight the ability to maneuver the stack through doorways and thresholds.

Section 5: Conclusion

Conclude the article by summarizing the benefits of moving an entire stack of Packouts without leaning and using the Packout roller. Encourage readers to try out this method for a safer and more convenient transportation experience.

Highlights

• Learn how to move an entire stack of Packouts without leaning and risking injury.
• Install the Packout roller for enhanced convenience and ease of movement.
• Discover the benefits of using the Packout roller for maneuvering through doorways and thresholds.

FAQ

Q: Is it possible to move a stack of Packouts without leaning? A: Yes, by following the steps outlined in this article, you can move a stack of Packouts without the need to lean it.

Q: How do I install the Packout roller? A: The installation process involves unscrewing the bars, sliding the roller through the Packout, and securing it with bolts and lock nuts. Detailed instructions can be found in the article.

Q: Can the Packout roller be used with other storage systems besides Packouts? A: The Packout roller is specifically designed for use with Packouts. It may not be compatible with other storage systems.

Q: Will using the Packout roller affect the stack's stability? A: No, the Packout roller is designed to enhance stability while moving the stack, making it a safer option compared to leaning the stack.

Q: Where can I purchase the Packout roller? A: The Packout roller can be obtained from James at Get Tools. Links to the product are provided in the article.